簡體中文
English
Product Description：
Name：UL 498 Standard Plugs and Receptacles Blades Test Gauges
Type：BND-UL498
Application:
These plug and socket test gauges are mainly used to test and inspect whether the structure and size of plugs and sockets conform to UL 498 standards. And the mainly application industries is electronics, electrical appliances, plugs and sockets and other similar areas.
Features:
Gauge dimensions, tolerances, material, hardness, surface roughness conform to the standards requirements;
Surface corrosion and abrasion resistance can resist normal contact corrosion and not embroidered patch (the operator hand may exist in the sweat, the corrosion effect equivalent to NACL salt solution or NH4CL salt solution corrosion);
Material hardness is more than 60HRC;Material thermal expansion coefficient is small, dimensions and tolerances is stable and reliable
Standard figure and Parameters:
| 1 | UL498-figure9.1 | Articulate probe with web stop | |||
| 2 | UL498-figure10.1 | Probe | |||
| 3 | UL498-figure31.1 | Flat probe | |||
| 4 | UL498-figure69.1 | Reference plug | |||
| 5 | UL498-figure94.1 | Impoper insertion test blades | |||
| 6 | UL498-figure105.1 | Test plug | |||
| 7 | UL498-figure105.2 | Test blade | |||
| 8 | UL498-figure118.1 | Receptacle test fixture | |||
| 9 | UL498-figure118.3 | Push out tool | |||
| 10 | UL498-figure118.5 | Bridge | |||
| 11 | UL498-figure119.1 | Test pin A | |||
| 12 | UL498-figure119.2 | Test pin B | |||
| 13 | UL498-figure119.3 | 57g ground pin | |||
| 14 | UL498-figure119.4 | 113g ground pin | |||
| 15 | UL498-figure129.2 | No.14AWG test pin | |||
| 16 | UL498-figure132.1 | Test probe | |||
| 17 | UL498-fig132.2 | Test probe | |||
| 18 | UL498-figure144.2 | Fixture for assembly security test | |||
| 19 | UL498-figureSD13.2 | Over size ground pin | |||
