Household refrigerating appliances-Characteristics and test methods(lS0 15502:2005)English version of DIN EN ISO 15502:2006

Test packages

1. Dimensions and tolerances：

The test packages used in the tests shall be in the form of rectangular parallelepipeds. Their size, prior to freezing, and their mass, packaging included, shall be in accordance with Table 3.

Test packages shall be checked regularly and shall not present visible holes or cracks on the wrapper.

When any package is found to exceed a tolerance according to Table 3, it shall be replaced by a new package.

2. Composition

The packages shall consist of the following.

a)A suitable filling material containing, per 1 000 g:

--230 g of oxyethylmethylcellulose;

--764.2 g of water;

--5 g of sodium chloride;

--0,8 g of 6-chloro-m-cresol.

The freezing point of this material is - 1 °C (its thermal characteristics correspond to those of lean beef)

.b) The following alternative composition of test packages with a freezing point near - 5 °C may be used:

--232 g of oxyethyimethylcellulose;

--725 g of water;

--43 g of sodium chloride;

--0.6 g of 6-chloro-m-cresol.

In case of dispute, the composition of test package a) shall be used as the reference test package. For the measurement of chill compartments, only test package b) with a freezing point of - 5 °C, shall be used.

c) A wrapper, consisting of a sheet of plastic or any other suitable material of such a nature that exchange of moisture with the ambient medium is negligible. After filing, the wrapping sheet shall be sealed. lt is advisable to use a laminated sheet, consisting of layer of high-pressure polyethylene, easily sealable120 um thick, together with an external sheet of polyethyleneterephthalate approximately 12.5 um thick. the two layers being bonded together.

SHENZHEN BONAD INSTRUMENT CO.,LTD, is a high-tech company in China, BONAD quality system has been strictly certified by ISO9001:2015. As a CIE Membership.

Our main products are Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, accessibility test probe and test finger, Glow Wire Test and Needle Flame Test, freezing load test package, soil moisture sensor, all kinds of gauges and so on.

BONAD have gathered lots of experienced researchers and administrators on this field. BONAD products are manufactured strictly in accordance with various EN, IEC, CE, UL, VDE, VS, JIS, ISO, CEE, BS, FMV, GB and other similar international standards. All products can pass CE certificate and authenticated by the third party lab.

Please feel free to contact us if you need any support.

sales Dep:Alice@http://www.miya998.com,

Cell/WhatsApp:+8613380391156